Ocena wątku:
  • 0 głosów - średnia: 0
  • 1
  • 2
  • 3
  • 4
  • 5

[ RSS ] RouterOS 6.48beta12 [Testing]

RouterOS 6.48beta12 [Testing]

6.48beta12 changelog:

*) arm - added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
*) arm - improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
*) bonding - added LACP monitoring (CLI only);
*) bridge - added warning message when port is disabled by the BPDU guard;
*) bridge - correctly remove dynamic VLAN assignment for bridge ports;
*) bridge - fixed dynamic VLAN assignment when changing port "frame-type" property (introduced in v6.46);
*) bridge - fixed dynamic VLAN assignment when changing port to tagged VLAN member;
*) bridge - fixed local MAC address removal from host table when deleting bridge interface;
*) bridge - improved BPDU guard logging;
*) chr - improved interface loading on startup on XEN;
*) chr - improved system stability when changing flow control settings on e1000;
*) crs3xx - added initial Bridge Port Extender support (CLI only);
*) crs3xx - added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
*) crs3xx - fixed duplicate host entries when creating static switch hosts;
*) crs3xx - fixed HW offloading for netPower 15FR and netPower 16P devices (introduced in v6.47);
*) crs3xx - fixed increased CPU temperature for CRS354-48G-4S+2Q+ device (introduced in v6.47);
*) crs3xx - improved Ethernet port group traffic forwarding for CRS354 devices;
*) defconf - fixed default configuration loading on RBmAPL-2nD;
*) defconf - improved default configuration generation on devices with changed wireless interface names;
*) dhcpv6-server - added ability to generate binding on first request;
*) dhcpv6-server - disallow changing binding's "prefix-pool";
*) dhcpv6-server - improved stability when changing server for static bindings;
*) dns - do not allow setting "forward-to" same as "name" or "regex";
*) dns - do not allow setting zero value IP addresses for "A" and "AAAA" records;
*) dns - do not use DoH for local queries when a server is specified;
*) dns - do not use type "A" for static entries with unspecified type;
*) dns - fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
*) export - fixed HotSpot "address-per-mac" parameter export;
*) export - fixed RouterBOARD USB "type" parameter export;
*) fetch - show status "uploaded" instead of "downloaded" when uploading a file;
*) filesystem - fixed increased "sector writes" reporting (introduced in v6.47);
*) filesystem - improved long-term filesystem stability and data integrity;
*) ftp - fixed possible buffer overflow;
*) ike1 - allow using "my-id" parameter with XAuth;
*) ike1 - fixed policy update with and without mode configuration;
*) ike1 - rekey phase 1 as responder for Windows initiators;
*) ike2 - added "prf-algorithm" support for phase 1;
*) ike2 - fixed initiator child SA init without policy;
*) ike2 - fixed policy reference for pending acquire;
*) ike2 - improved child SA rekeying process;
*) ike2 - retry RSA signature validation with deduced digest from certificate;
*) ipsec - added SHA384 hash algorithm support for phase 1 (CLI only);
*) ipsec - do not update peer endpoints for generated policy entries (introduced in v6.47);
*) ipsec - fixed multiple warning message display for peers;
*) ipsec - inactivate peer's policy on disconnect;
*) kidcontrol - allow creating static device entries without assigned user;
*) lora - added "spoof-gps" parameter for fake GPS coordinate sending;
*) lora - fixed JSON statistics inaccuracies;
*) lte - added "age" column and "max-age" parameter to "cell-monitor" (CLI only);
*) lte - added "comment" parameter for APN profiles (CLI only);
*) lte - added support for MTS 8810FT;
*) lte - fixed modem initialization when multiple modems are used simultaneously;
*) lte - fixed PDP authentication configuration for SIM7600;
*) metarouter - fixed image importing (introduced in v6.46);
*) ospf - improved route tag processing for OSPFv3;
*) ppp - added "ipv6-routes" parameter to "secrets" menu;
*) ppp - added support for "Framed-IPv6-Route" RADIUS attribute;
*) ppp - allow specifying pool name for "remote-ipv6-prefix-pool" parameter;
*) profile - fixed "unclassified" load reporting on PowerPC devices (introduced in v6.47);
*) qsfp - fixed auto-negotiation status;
*) qsfp - fixed break-out cable linking after reboot (introduced in v6.47);
*) qsfp - ignore FEC mode when set to fec91, only fec74 mode is supported (introduced in v6.47);
*) route - improved stability when 6to4 interface is configured with disabled IPv6 package;
*) routerboard - fixed "mode-button" support on SMIPS devices (introduced in v6.47);
*) routerboard - fixed "reset-button" menu presence on all devices;
*) smb - fixed possible memory leak;
*) smb - fixed SMB server (introduced in v6.47);
*) smb - limit active session count to 5 per connection;
*) ssh - fixed returned output saving to file when "output-to-file" parameter is used;
*) supout - added "LoRa" section to supout file;
*) switch - fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
*) system - replace "3" in superscript to "^3" on RBD53GR devices;
*) tr069-client - added LTE model and revision parameters;
*) tr069-client - added "X_MIKROTIK_MimoRSRP" parameter for LTE RSRP value reporting;
*) tr069-client - allow passing LTE firmware update URL as XML;
*) w60g - added "mdmg-fix" parameter for RBwAP60Gx3 (CLI only);
*) winbox - allow performing "USB Power Reset" on "0" bus on RBM33G;
*) winbox - fixed flag displaying under "IP/DNS/Static" table;
*) winbox - fixed "IP->Kid Control->Devices" table automatic refreshing;
*) winbox - fixed minor typo in "BGP/Peer" menu;
*) winbox - fixed minor typo in "Users" menu;
*) winbox - fixed "receive-errors" setting persistence under "Wireless/Wireless Sniffer/Settings" menu;
*) winbox - fixed "tls-version" parameter setting under "IP/Services" menu;
*) winbox - hide irrelevant switch port parameters;
*) winbox - use health values reported by gauges for "System/Health" menu;
*) wireless - changed "station-roaming" default setting from "enabled" to "disabled";
*) wireless - create "connect-list" rule when address specified for "setup-repeater";
*) wireless - updated "bangladesh" regulatory domain information;
*) wireless - updated "egypt" regulatory domain information;

Download the new 'RouterOS 6.48beta12' version here: https://mikrotik.com/download


Podobne wątki…
Wątek: / Autor Odpowiedzi: Wyświetleń: Ostatni post
Ostatni post przez MikroTik
09-17-2020, 08:47 AM
Ostatni post przez MikroTik
09-04-2020, 11:01 AM

Skocz do:

Użytkownicy przeglądający ten wątek: 1 gości